Toyota Camry
XV30 (2002–2006) Service Manual
Exterior/interior trim
Rear bumper
COMPONENTS
REPLACEMENT
HINT:
The installation is in the reverse order of the removal. However, when there is
a special point concerning
the installation, it is indicated.
- REMOVE LUGGAGE COMPARTMENT FLOOR MAT
- REMOVE SPARE WHEEL COVER ASSY
- REMOVE LUGGAGE COMPARTMENT SIDE COVER SUB−ASSY RH
- REMOVE LUGGAGE COMPARTMENT TRIM HOOK No.1
a. Remove the 2 bolts and luggage compartment trim hooks.
5. REMOVE REAR FLOOR FINISH PLATE
a. Disengage the clips and remove the rear floor finish plate.
6. REMOVE LUGGAGE COMPARTMENT TRIM COVER
INNER RH
a. Using a clip remover, remove the 2 clips and luggage
compartment trim cover inner.
7. REMOVE LUGGAGE COMPARTMENT TRIM COVER
INNER LH
8. REMOVE REAR BUMPER COVER
- Remove the 8 nuts, 4 bolts. (Inside)
- Remove the 2 screws, 4 clips and rear bumper cover.
(outside)
- Disengage the rear bumper seal bracket and remove the
rear bumper cover.
Remove rear bumper cover
9. REMOVE REAR BUMPER SIDE RETAINER RH
- Remove the clip and rear bumper side retainer. (Only TMC made)
- Remove the rivet and rear bumper side retainer. (Only TMMK made)
- REMOVE REAR BUMPER SIDE RETAINER LH
- REMOVE REAR BUMPER RETAINER UPPER RH
- Remove the 3 clips and rear bumper retainer upper. (Only TMC made)
- Remove the 4 rivets and rear bumper retainer upper. (Only TMMK
made)
- REMOVE REAR BUMPER RETAINER UPPER LH
- REMOVE REAR BUMPER ENERGY ABSORBER
- REMOVE REAR BUMPER REINFORCEMENT SUB−ASSY
a. Remove the 6 nuts and rear bumper reinforcement.
15. INSTALL REAR BUMPER REINFORCEMENT SUB−ASSY
a. Install the front bumper reinforcement with 6 nuts.
Torque: 34 N·m (347 kgf·cm, 25 ft·lbf)
More about «Exterior/interior trim»:
Rear bumper