Toyota Camry

 XV30 (2002–2006) Service Manual

Heater & air conditioner
V (cooler compressor to crankshaft pulley) beltNNo.1

REPLACEMENT

1. REMOVE V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT No.1

1. Loosen the bolt C.
2. Loosen the bolt A.
3. Loosen the bolt B and remove the cooler V belt No. 1.

Remove V (cooler compressor to crankshaft pulley) belt No.1

2. INSTALL V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT No.1

a. Temporarily install the cooler V belt No. 1 as illustrated.

Install V (cooler compressor to crankshaft pulley) belt No.1

3. ADJUST V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT No.1

a. Apply drive belt tension by turning the bolt B.

Drive belt tension:

New Belt: 165 27 lbf
Used belt: 88 22 lbf

HINT:

• ”New belt” refers to a belt which has been used less than 5 minutes on a running engine.
• ”Used belt” refers to a belt which has been used on a running engine for 5 minutes or more.
• After installing the drive belt, check that it fits properly in the ribbed grooves.

• Check that the drive belt fits properly in the ribbed grooves.

4. FULLY TIGHTEN V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT No.1

1. Tighten the bolt A.

   Torque: 17.5 N·m (178 kgf·cm, 12 ft·lbf)

2. Tighten the bolt C.

   Torque: 58 N·m (591 kgf·cm, 43 ft·lbf)

Fully tighten V (cooler compressor to crankshaft pulley) belt No.1

Air conditioning system

Refrigerant

Air conditioning system

Refrigerant

Refrigerant line

V (cooler compressor to crankshaft pulley) beltNNo.1

Air conditioner control assembly

Air conditioning panel sub-assy

Air conditioning radiator assy

Air conditioning system

Blower assy

Cooler compressor assy (3MZ−FE)

Cooler compressor assy (1MZ−FE)

Cooler compressor assy (2AZ−FE)

Cooler condenser assy