REPLACEMENT
DISCONNECT BATTERY NEGATIVE TERMINAL
REMOVE INSTRUMENT PANEL SAFETY PAD SUB−ASSY
REMOVE AIR CONDITIONING RADIATOR ASSY
REMOVE AIR BAG ECU ASSY
REMOVE AIR CLEANER ASSY
REMOVE INTAKE AIR CONNECTOR SUB−ASSY
REMOVE EXHAUST PIPE ASSY
REMOVE TRANSMISSION CONTROL CABLE ASSY
Remove the 2 bolts and disconnect shift cable grommet retainer No.2.
Remove the nut from the control shaft lever.
Disconnect the control cable from the control shaft lever.
Remove the clip and disconnect the control cable from the control cable bracket.
Disconnect the control cable from the control cable clamp.
Disconnect the floor shift cable from the transmission floor shift assy.
Pull out the control cable from the body.
Remove the shift cable grommet retainer No. 2.
9. INSTALL TRANSMISSION CONTROL CABLE ASSY
Put in the control cable to the body.
Install the shift cable grommet retainer No.2 to the floor shift cable.
Install the floor shift cable as shown in the illustration.
HINT:
Install it with the uneven surface facing to up.
Fit the claws securely.
Connect the control cable to the control cable clamp.
Install the control cable and a new clip to the bracket.
Temporarily install the control cable to the control shaft lever with nuts.
Install the shift cable grommet retainer No.2 with the 2 bolts.
Torque: 4.9 N·m (50 kgf·cm, 43 in.·lbf)
INSTALL EXHAUST PIPE ASSY
INSTALL AIR BAG ECU ASSY
INSTALL AIR CONDITIONING RADIATOR ASSY
ADJUST SHIFT LEVER POSITION
INSPECT SHIFT LEVER POSITION
INSTALL INTAKE AIR CONNECTOR SUB−ASSY
INSTALL AIR CLEANER ASSY
INSTALL BATTERY NEGATIVE TERMINAL