Toyota Camry

 XV30 (2002–2006) Service Manual

Front suspension
Front suspension arm sub-assy lower No.1 LH

REPLACEMENT

HINT:

COMPONENTS

1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE (1MZ−FE ENGINE TYPE)

2.  REMOVE ENGINE ASSEMBLY WITH TRANSAXLE (2AZ−FE ENGINE TYPE)

3. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE (3MZ−FE ENGINE TYPE)

4. REMOVE TRANSVERSE ENGINE ENGINE MOUNTING INSULATOR (A/T TRANSAXLE)

a. Remove the 3 nuts and the transverse engine engine mounting insulator.

Remove transverse engine engine mounting insulator (A/T transaxle)

5. REMOVE TRANSVERSE ENGINE ENGINE MOUNTING INSULATOR (M/T TRANSAXLE)

1. Remove the 3 nuts and the transverse engine engine mounting insulator.
2.  Remove the 4 bolts and bracket from the manual transmission.

6. REMOVE FRONT SUSPENSION ARM SUB−ASSY LOWER No.1 LH

a. Remove the 2 bolts on the front side of the front suspension arm sub−assy lower No. 1 LH.

2. Remove the bolt and nut on the rear side of the front suspension arm sub−assy lower No. 1 LH.
3. Remove the front suspension arm sub−assy lower No. 1 LH.
4. Remove the front lower arm bush stopper from the front suspension arm sub−assy lower No. 1 LH.

7. INSTALL FRONT SUSPENSION ARM SUB−ASSY LOWER No.1 LH

1. Install the front lower arm bush stopper to the front suspension arm sub−assy lower No. 1 LH.
2. Install the front suspension arm sub−assy lower No. 1 LH with the 2 bolts to the front side.

   Torque: 200 N·m (2,039 kgf·cm, 148 ft·lbf)

c. Install the front suspension arm sub−assy lower No. 1 LH with the bolt and nut to the rear side.

Torque: 206 N·m (2,101 kgf·cm, 152 ft·lbf)

8. INSTALL TRANSVERSE ENGINE ENGINE MOUNTING INSULATOR (A/T TRANSAXLE)

a. Install the transverse engine engine mounting insulator with the 3 nuts.

Torque: 87 N·m (887 kgf·cm, 64 ft·lbf)

9. INSTALL TRANSVERSE ENGINE ENGINE MOUNTING INSULATOR (M/T TRANSAXLE)

1. Install the bracket with the 4 bolts to the manual transmission.

   Torque: 64 N·m (653 kgf·cm, 47 ft·lbf)

2. Install the transverse engine engine mounting insulator with the 3 nuts.

   Torque: 87 N·m (887 kgf·cm, 64 ft·lbf)

10. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE (2AZ−FE ENGINE TYPE)

11. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE (1MZ−FE ENGINE TYPE)

12. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE (3MZ−FE ENGINE TYPE)

Lower ball joint assy front LH

Front suspension system

Front shock absorber with coil spring

Front suspension arm sub-assy lower No.1 LH

Front suspension system

Stabilizer bar front

Front suspension

Front wheel alignment