Toyota Camry

 XV30 (2002–2006) Service Manual

Supplemental restraint system
Air bag sensor front LH

COMPONENTS

REPLACEMENT

HINT: COMPONENTS

1. PRECAUTION

2. DISCONNECT BATTERY NEGATIVE TERMINAL

3. REMOVE ENGINE UNDER COVER RH

4. REMOVE AIR BAG FRONT RH SENSOR

a. Remove the bolt and front airbag sensor RH.

b. Disconnect the connector from the front airbag sensor RH.

HINT: Insert a screw driver in any of the three opening sections of the sensor and slide the sensor to disconnect it from the connector.

5. INSPECT AIR BAG FRONT RH SENSOR

6. INSTALL AIR BAG FRONT RH SENSOR

1. Check that the ignition switch trun OFF.

2.  Check that the battery negative (−) terminal is disconnected.

NOTICE: Do not start the operation for 90 seconds after removing t

he terminal.

3. Install the front airbag sensor RH with the bolt.

   Torque: 17.5 N·m (178 kgf·cm, 13 ft·lbf)

4. Connect the connector to the front airbag sensor RH.

5. Check that no play is identified.

7. INSPECT SRS WARNING LIGHT

Horn button assy

Spiral cable sub-assy

Front passenger airbag assy (From July, 2003)

Curtain shield air bag assy LH

Front seat airbag assy RH

Air bag sensor assy center

Air bag front RH sensor

Air bag sensor front LH

Air bag sensor front LH

Air bag sensor front LH

Side air bag sensor assy RH

Air bag sensor rear LH

Seat position air bag sensor (From July, 2003)

Occupant classification ecu (From July, 2003)