Toyota Camry

 XV50 (2012–2017) Owners Manual

Before driving » Opening, closing and locking the doors and trunk » Antenna location and effective range
Switching the door unlock function

It is possible to set which doors the entry function unlocks using the wireless remote control.

Turn the “ENGINE START STOP” switch off.

When the indicator light on the key surface is not on, press and hold , , or for about 5 seconds while pressing and holding .

The setting changes each time an operation is performed, as shown below.

(When changing the setting continuously, release the buttons, wait for at least 5 seconds, and repeat step 2.)

Vehicles with an alarm system: To prevent unintended triggering of the alarm, unlock the doors using the wireless remote control and open and close a door once after the settings have been changed. (If a door is not opened within 60 seconds after is pressed, the doors will be locked again and the alarm will automatically be set.) In case that the alarm is triggered, immediately stop the alarm.

Antenna location

Effective range (areas within which the electronic key is detected)

Operation signals

When the door cannot be locked by the lock sensor

Alarms and warning indicators

Security feature

Switching the door unlock function

Battery-saving function

Electronic key battery-saving function

Conditions affecting operation

Notes for the entry function

Notes for locking the doors

Notes for the unlocking function

When the vehicle is not driven for extended periods

Alarm (if equipped)

To operate the system properly

If the smart key system does not operate properly

Electronic key battery depletion

If the smart key system has been deactivated in a customized setting

Customization that can be configured at Toyota dealer

Certification for the smart key system