Toyota Camry

 XV50 (2012–2017) Owners Manual

Before driving » Opening and closing the windows and moon roof
Power windows

The power windows can be opened and closed using the switches.

Operating the switch moves the windows as follows:

1 Closing
2 One-touch closing (driver’s window only)* 3 Opening
4 One-touch opening (driver’s window only)*

*: Pressing the switch in the opposite direction will stop window travel partway.

Window lock switch

Press the switch down to lock the passenger window switches.

Use this switch to prevent children from accidentally opening or closing a passenger window.

■The power windows can be operated when

Vehicles without a smart key system

The engine switch is in the “ON” position.

Vehicles with a smart key system

The “ENGINE START STOP” switch is in IGNITION ON mode.

■Operating the power windows after turning the engine off

Vehicles without a smart key system

The power windows can be operated for approximately 45 seconds even after the engine switch is turned to the “ACC” or “LOCK” position. They cannot, however, be operated once either front door is opened.

Vehicles with a smart key system

The power windows can be operated for approximately 45 seconds even after the “ENGINE START STOP” switch is turned to ACCESSORY mode or turned off. They cannot, however, be operated once either front door is opened.

■Jam protection function (driver’s window only)

If an object becomes caught between the window and the window frame, window travel is stopped and the window is opened slightly.

■When the power window does not close normally (driver’s window only)

If the jam protection function is operating abnormally and a window cannot be closed, perform the following operations using the power window switch on the driver’s door.

●Vehicles without a smart key system: After stopping the vehicle, the window can be closed by holding the power window switch in the one-touch closing position while the engine switch is turned to the “ON” position.

●Vehicles with a smart key system: After stopping the vehicle, the window can be closed by holding the power window switch in the one-touch closing position while the “ENGINE START STOP” switch is turned to IGNITION ON mode.

●If the window still cannot be closed even by carrying out the operation explained above, initialize the function by performing the following procedure.

1. Hold the power window switch in the one-touch closing position.

   Continue holding the switch for a further 6 seconds after the window has closed.

2. Hold the power window switch in the one-touch opening position.

   Continue holding the switch for a further 2 seconds after the window has opened completely.

3. Hold the power window switch in the one-touch closing position once again. Continue holding the switch for a further 2 seconds after the window has closed.

If you release the switch while the window is moving, start again from the beginning.

If the window continues to close but then re-open slightly even after performing the above procedure correctly, have the vehicle inspected by your Toyota dealer.

■Customization that can be configured at Toyota dealer

Settings (e.g. key linked operation) can be changed.

(Customizable features)

CAUTION
■Closing the windows Observe the following precautions.

Failure to do so may result in death or serious injury.

●Check to make sure that all passengers do not have any part of their body in a position where it could be caught when a window is being operated.

●Do not allow children to operate the power windows.

Closing a power window on someone can cause serious injury, and in some instances, even death.

■Jam protection function (driver’s window only) ●Never use any part of your body to intentionally activate the jam protection function.

●The jam protection function may not work if something gets caught just before the window fully closes.

Power windows

Moon roof