Toyota Camry

 XV30 (2002–2006) Service Manual

Lubrication
Brake

ON−VEHICLE INSPECTION

1. INSPECT BRAKE LINE PIPES AND HOSES

HINT: Work in a well−lighted area. Turn the front wheels fully to the right or left before beginning.

a. Check all the brake lines and hoses for:

• Damage
• Wear
• Deformation
• Cracks
• Corrosion
• Leaks
• Bends
• Twists

1. Check all the clamps for tightness and the connections for leakage.
2. Check if the hoses and lines are not near sharp edges, moving parts and the exhaust system.
3. Check if the lines are installed pass through the center of the grommets.

 Inspect brake line pipes and hoses

2. INSPECT FRONT BRAKE PADS AND DISCS

3. INSPECT REAR BRAKE PADS AND DISCS

4. INSPECT REAR BRAKE LININGS, DISCS AND DRUMS

5. INSPECT OR CHANGE BRAKE FLUID Fluid: SAE J1703 or FMVSS No.116 DOT3

Lubrication system (2AZ−FE)(From July, 2003)

Oil pump assy (2AZ−FE)(From July, 2003)

Lubrication system (1MZ−FE/3MZ−FE)

Oil filter sub-assy (1MZ−FE/3MZ−FE)

Oil pump assy (1MZ−FE/3MZ−FE)

Oil filter sub-assy (2AZ−FE)(From July, 2003)

Oil pump assy 1MZ−FE/3MZ−FE)

Oil pump assy (2AZ−FE)(From July, 2003)

Outside vehicle

Inside vehicle

Under hood

Engine

Brake

Chassis

Body